Push-pull connectors
Multi-contact circular push-pull connectors come in 2 parts, with a plug fitted with 2 hyperboloid socket contacts and a receptacle fitted with 10 pin contacts.
Made from high performance materials with high performance finishes, these connectors can be used in severe mechanical and climatic environments.
These bronze or bronze aluminium connectors incorporate :
- a cable gland connector for potting and a sleeve,
- O-ring gaskets,
- push-pull locking.
Features
- Insulator in front of the socket: Chloroprene;
- Insulator behind the socket: Celanex®;
- Contacts: Brass;
- Contact finish: Nickel/Gold;
- Connector finish: Mat nickel;
- Protection index: IP 68;
- Max power : 7A;
- Insulation resistance: > 5000MΩ;
- Contact resistance: 1.5m V/A;
- Withstanding voltage: = 2000V – 50Hz;
- Climate category: – 25°C/+ 70°C.
Benefits
- Longevity;
- Corrosion resistance;
- Total protection against dust and prolonged immersion;
- Rapid locking, blind, anti-vandalism;
- Good reliability in severe mechanical and climatic environments;
- Reliability under vibration (electrical continuity).
Bayonet connectors
Multi-contact circular bayonet connectors come in 2 parts, plug and receptacle, with a size 12 body fitted with 3 gauge 20 crimp contacts.
Made from high performance materials with high performance finishes, these connectors can be used in severe mechanical and climatic environments.
These aluminium alloy connectors incorporate:
- a mechanical fool proofing system by rotation of the insulator in the body,
- the contacts held mechanically by deformation of the insulators,
- bayonet locking.
Features
- Square socket receptacle;
- Neoprene™ insulator;
- Prong and socket contacts (size 20): Brass (Nickel/Gold finish);
- Finish: Neutral anode oxidation;
- Strain-relief sleeve: Fluorinated silicone;
- Square receptacle gasket: Neoprene™.
Benefits
- Low weight;
- 5 codings possible;
- Rapid locking;
- Good reliability in severe mechanical and climatic environments;
- Good corrosion resistance;
- Easy mounting on a partition.
Connectors for rail track switches control systems
This sealed connector is suitable for use on railways for transmitting signals regarding the position of points.
Made from high performance materials with high performance finishes, it provides rapid connection and disconnection, thus permitting a reduction in the time required for assembly/dismantling and avoids wiring errors.
This connector incorporates:
- a sealed body,
- high reliability signal contacts,
- secure locking,
- corrosion protection.
Features
- Receptacle body: Peek;
- Insulator: elastomer;
- Pure anode oxidation protection;
- Positive locking;
- High reliability signal contacts;
- Resistance to extremely severe environmental constraints.
Benefits
- Clean signal transmission under vibration;
- Sealed connection and operation;
- Resistance to temperature and ageing;
- Secure locking under vibration;
- Corrosion resistance.
Headers
Noryl® connectors with flat contacts moulded into the insulation block.
Made from high performance materials with high performance finishes, these connectors can be used in severe mechanical and climatic environments.
Features
- Insulator: Noryl® GFN 30;
- Contacts: Silvered on the front, tinned at the back.
Benefits
- No risk of contact movement;
- Good contact resistance;
- Good reliability in severe mechanical and climatic environments;
- Ease of wiring.
Our Customers
