Threaded connectors
Multi-contact circular connectors derived from the ST 538 AGB/T and NF C 93422 extension HE 314 standards, are composed of an hermetically sealed receptacle with 61 gauge 20 prong contacts.
Made from high performance materials with high performance finishes, these connectors can be used in severe mechanical and climatic environments.
These bronze marine connectors incorporate:
- 5 fool proofing keys,
- an O-ring on the body,
- threaded locking device.
Features
- Receptacle with a notched nut and locking washer fixing for panels;
- Insulator: Diallyl phthalate or Silicon;
- Contacts: Copper alloy;
- Contact finish: Gold on nickel, tinned core;
- Conductor part: 0.93mm2 max.;
- O-ring: Silicon;
- Mechanical fool proofing: 5 keys;
- Sealing: Pressure differential of 1 bar, leak = 2.8mm3/hour;
- Voltage resistance: 1500V eff. at 50Hz;
- Max power: 7.5A;
- Insulation resistance: = 1mΩ;
- Saline mist: 960h.
Benefits
- No bimetallic couple between plug and receptacle (in standard stainless steel);
- Good reliability in severe mechanical and climatic environments;
- Anti-rotation and anti-slackening;
- 5 codings possible.
Power supply connectors
These multi-contact connectors with a receptacle fitted with 2 filtered contacts, are particularly suitable for power supply signal transmission.
Made from high performance materials with high performance finishes, these connectors can be used in severe mechanical and climatic environments.
These aluminium alloy connectors incorporate:
- contacts combined with filter components mounted on the IC in the insulating block,
- sealing ensured by moulding in polyurethane resin and a bi-material gasket (anti-corrosion),
- wire outlet and connection by CMM connector.
Features
- Insulator: Polyurethane resin;
- Finish: Tinning;
- Contacts: Copper nickel alloy;
- Protection index: IP 68;
- Climate category: – 40°C/+ 75°C.
Benefits
- Light;
- Signal filtering;
- EMC shielding;
- Sealed;
- Good reliability in severe mechanical and climatic environments;
- Total protection against dust and prolonged immersion.
Grounding connectors
Single contact Jack type grounding connectors are composed of 2 parts, a plug and solderable contact and a mechanically connected receptacle. Theycome in 3 types of grounding.
Made from high performance materials with high performance finishes, these connectors can be used in severe mechanical and climatic environments.
These stainless steel and brass connectors incorporate:
- different types of grounding,
- different cable diameters,
- different models with or without a nut,
- different models with a tommy nut for a safety wire.
Features
- Receptacle: Gold plated brass;
- Plug: Stainless steel;
- Handle: Black Delrin® (9mm2 max. cable section);
- Finish: Passivation;
- Nut coupling torque: 1.9daNm;
- Receptacle with added spring contact.
Benefits
- Good earthing continuity;
- Good reliability in severe mechanical and climatic
- environments;
- Low contact resistance;
- Vibration resistance.
Rocket connectors
These connectors come in 2 parts, a jettisonable plug (mobile part) and a receptacle to be attached to a structure. They are particularly suitable for the transmission of security signals.
They are fitted with 2 core contacts and shielding. Made from high performance materials with high performance finishes, these connectors can be used in severe mechanical and climatic environments.
These connectors incorporate:
- a cable,
- a thermo-retractable sheath,
- crimp and moulded contacts,
- signal transmission via a central contact and by continuity with the equipment,
- a splicing and spring fixing system,
- a jettison system via traction.
Features
Mobile part:
- Plug: Polyamide 6/6;
- Contacts: Copper alloy, Gold finish;
- Sleeve: Silicon;
- Cable: length 470mm.
Screw receptacle:
- Tube: Brass, passivation;
- Contacts: Brass nickel/gold finish;
- Spring: Stainless steel;
- Lugs: PTFE GF 25;
- Climate category: – 46°C/+130°C.
Benefits
- Good mechanical resistance;
- Rapid cabling on equipment;
- Sealed plug;
- Good reliability in severe mechanical and climatic environments;
- Rapid and simple implementation.
Thread-lock connectors
Multi-contact circular power connectors come in 2 parts, prong and receptacle, with 4 gauge 8 crimp contacts and a gauge 20 contact.
Made from high performance materials with high performance finishes, these connectors can be used in severe mechanical and climatic environments.
These aluminium alloy connectors incorporate:
- 4 Ø 4.3 holes for the mounting key,
- 49 teeth,
- a grounding ring between prong and receptacle,
- a locking screw.
Features
- Square socket receptacle;
- Finish: Olive drab cadmium plating;
- Strain-relief sleeve: Fluorinated silicone;
- Square receptacle gasket: Neoprene™;
- Electrical continuity: Olive drab cadmium plating: = 2.5mΩ – Nickel: = 1mΩ;
- Saline mist: Olive drab cadmium plating: 500h – Nickel: 48h;
Benefits
- Light weight;
- Threaded hole option;
- Good reliability in severe mechanical and climatic environments;
- Offset pilot contact: cut guarantee (switch).
Spring connectors
These specific multi-contact circular connectors with a filtered receptacle equipped with 2 spring loaded prong contacts, are particularly suitable for power supply signal transmission.
These multi-contact circular connectors are equipped with long-stroke piston contacts. Made from high performance materials with high performance finishes, these connectors can be used in severe mechanical and climatic environments.
These aluminium alloy connectors incorporate:
- a non-reflective coating,
- filtered contacts (filtering of signals and noise),
- an O-ring gasket,
- connection to the electronics via a ZIF connector on the printed circuit.
Features
- Receptacle fixed by an M12 nut;
- Receptacle finish: Mat zinc coating;
- Nut finish: Black anode oxidation;
- Insulator: PEEK;
- O-ring: Fluorinated silicon;
- Protection index: IP 68;
- Contact: Brass;
- Contact finish: Gold on nickel;
- Electrical continuity: = 2.5mΩ;
- Saline mist: 96h;
- Climate category: – 40°C/+ 55°C.
Benefits
- EMC Shielding;
- Watertight;
- Mechanical endurance: = 100,000 cycles;
- Good reliability in severe mechanical and climatic environments;
- Non-reflective.
Power connectors with lateral displacement
Designed for power supply boards, these rectangular connectors have 20 amp contacts.
They are composed of 2 fool-proofed guides with 6 coding positions, contacts accommodating lateral displacement over ± 0.3mm and with very low contact resistance.
These connectors are composed of:
- a female motherboard connector for direct connection onto the IC,
- a male connector fitted with CMS type contacts.
Features
- 2 fool-proofed guides with 6 coding positions;
- Contacts: 20A;
- Coupling torque: max 3N;
- Uncoupling torque: min 0.5N;
- Mechanical endurance: 200 operations;
- Contact resistance: < 0.6Ω;
- Climate category: – 55° C/+ 125°C.
Benefits
- Very low contact resistance;
- The guide mechanism acts before the contacts connect;
- The motherboard contacts accommodate lateral displacement over a maximum of ± 0.3mm by the male contacts during and after plugging in.
EMI/EMP filter connectors
These EMI/EMP filter connector has simple, C and LC filtered contacts and coaxial contacts.
They are fitted with body shielding with slotted plates permitting EMI shielding.
Features
- Type C or LC filtering;
- Nominal voltage: 100 V DC / 70 V AC, 50 Hz;
- Insulator: under 100 V Ri = 1000 MΩ;
- Nominal current: LC filter: 1A, C filter: 3A;
- KMX3 type coaxial contacts;
- 6 positions coder.
Benefits
- Surface mounting (SMT);
- Robust design and air industry applications qualified;
- Filtered and shielded solution (high frequency performance);
- Configuration on request.
